Cody L.
Originally had mine mounted lower which made for aggravation due to me normally checking fuel rail pressure and AFR like any of my vehicles. This made for a convenience + to can hook it to the left of your radio instead of the far left vent if you like that spot more. Great product, easy installation!
Brent B.
5 minute install. Looks amazing compared to a window or pillar mount. Would highly recommend this to anyone with a mini maxx
Alexander G.
Great quality and such a great design. Looks clean and allows for nice tucked wiring. Haven't had a product from SPE that's disappointed me yet. Highly recommend doing business.
Zack D.
I'm really happy that I purchased this product. It's really nice the company emails instructions on how to install their products. The new mount is really nice and in a much better spot than in your face like the suction cup mount. I really enjoy their products and will be back to purchase more.
Devin S.
It took awhile to arrive but was so easy to install after it arrived. It provides a clean look as well as easy to see and read. No longer have to have that insightly windshield mount that always bounced around. Would recommend to those who want a good look and stable device.
Mike K.
Super Fast and easy install and a vast improvement over the suction cup falling off the windshield 3 times a day!!
Braden J.
Super easy to install, 10 minutes tops. I did what someone else mentioned about throwing a couple layers of electrical tape around the outside edge for a tighter fit to avoid it rattling around.
Anthony R.
Perfect fit! Couldnt be a better fit!
Daniel C.
Should have bought this mount years ago! Way cleaner look than the factory suction cup mount. Easy to install and at a great price. Thanks SPE!
Robert H.
Great addition for the H&S Mini -Maxx. Easy install and looks sweet.
Brad C.
Easy and quick to install.
Travis P.
Easy-to-use and easy installation. SPE always have the best products.
Bradley Y.
The mount fitted just the way it was suppose to
Vince L.
Installs quickly once I found out how to remove the outer vent assembly. as some other reviews stated the mount is a little loose inside the housing but I was able to resolve that issue with 2 wraps of electrical tape around the mount ring. a quick razor around the edge to make the tape flush and the mount is super solid and will not wiggle, just be sure to line up your orientation before reassembly. overall a good product that won't drop your tuner on your lap going down the road.
Dawson W.
Really cleans up the interior look and makes it a lot easier to use due to the solid mounting and one less thing to look around on the dash. Best part heater vent still blows out great!!
Eric W.
Easy install, 10X better location for visibility and accessibility than windshield suction cup!
Steven A.
Easy to install, a bit of a loose fit allowing the mount to rotate a bit. It isn’t terrible but I would prefer it to not move once installed
William Y.
Great instructions and a easy install. It took me maybe 15 minutes to complete. I love the fact that my Mini Maxx mount is off my windshield now and in a easy to use location. Thank you Snyder Performance Engineering For your Outstanding Service.
Daniel S.
Mount fit great , looks great, and priced right .Makes install look super clean!
John C.
Great experience, very quick service and responsive.
Ivan S.
Love this mount, easy install and very secure.
Claudette H.
All products from SPE are high quality. This is we’re I shop for my diesel needs. Thanks
Fred B.
Great idea on gauge mount. The only thing I would change is to r&d it so it could move left/right, up/down. Currently hard to see in daylight probably due to reflection from window. Otherwise great product. Thank you, Fred
Also, standing by for your intake piping for 2014 Powerstroke.
Douglas R.
Much better than the supplied holder. Easy install. Just be careful popping clips.
Austin R.
I really like this product, the instructions are awesome and clear to comprehend. Only problem I had was removing the vent by means of the 4 tabs as they are a bit difficult to reach your hand in but with patience you can do it. I love not having it on the windshield anymore and just gives your truck that nice custom look I’d been looking for!
James R.
Fairly easy install only had a little trimming work needed done to keep wires from chaffing against AC duct and vent!
Nathan H.
I had to use a little dot of rtv to keep it from wanting to rotate in my vent housing. Other than that i have no complaints. It looks pretty good also
chris c.
Bought to replace stock mount, easy install and easy to read in the vent next to stereo. Originally installed in left hand vent but lots of glare made it hard to read, not SPE fault but something to note for inatall.
Scott L.
Easy to install. Love that it got it out of my windshield. Piece doesn’t ratchet around to hold in place like the vents do, but the cable holds to mini max in the position you pick.
Vince R.
Good product. Must cut honeycomb behind to ensure the hdmi will go thru. Once that is complete it is a flawless install.
Michael M.
I'm not the sharpest pencil in the box. It took me about 5 minutes and one You Tube video to figure how to take my vent out. Installed it and LOVE how it looks and works. I later went back and blocked out that Duct with some foam pad. Just to prevent condensation from developing and possibly shorting out the controller. I figure Better safe than sorry. Besides, I have 3 more across the dash to keep me cool. Ingenious ideal.
Tim H.
Easy as 1 2 3 looks great and take up no extra space on the dashboard along with keeping the unit cool on hot days.
Scott M.
I like the way it looks. On downside it's a little loose when it was installed. After driving for a while it would turn and become crooked. I pulled it back apart and wrapped some electrical tape around it on both sides. Once I did that, it was good. Hasn't moved yet. Overall I'm pretty happy with it
RYAN K.
Great products and customer service
Cody S.
Way better than the mount that comes with h&s tuner. Installation was a breeze and the mount is very sturdy.
Coleton K.
Works great would definitely buy again!
RYAN K.
Best mount I have found. Liked by everyone
PATRICK W.
This is a must have if you use the mini maxx tuner . It looks like it was made for the dash of my F-250 . No more windshield suction cup fall off junk . Easy to install and once fits like a glove . Thank You Team SPE for looking for nice upgrades to add to my truck .
alexander b.
Install is a breeze looks great it is a lil loose but driving down bumpy gravel roads you won’t notice it great design that looks oem and doesn’t leave it out in your face
timothy t.
The Mini Maxx vent mount is great. I was disappointed when it went on sale for less money and I asked if I could get the better price. I was basically told too bad. Even though it hadn’t even been shipped yet. But oh well, I guess I won’t be needing any other parts for my 6.7.
austin m.
fits good very simple to put in
Jack S.
Anyone that’s tired of the suction cup mount get this. The Mini Maxx vent mount is absolutely amazing. Installation of the mount was very easy and simple. Highly recommend.
MATTHEW S.
Awesome product! Really makes a nice clean install for the mini maxx instead of the suction cup. Only downside I had was after snapping the chrome ring back on it was able so spin freely. I just added a couple drops of super glue to the back side to keep it from spinning.
Jacob M.
Install took a minute to figure out, but once I figured it out it went together in just a few minutes. Its a much cleaner, nicer look. All in all I love all the Snyder products.
keenan f.
Easy install. Makes routing of wires and monitor super clean.
James H.
Love the mini Maxx Vent mount for my 2014 super duty. Great instructions, great product, and great American people.
Eric B.
I have never posted a review for anything I have ever purchased-NEVER. But, I had to write one for this simple, but awesomely effective, simple mod. 10 min install and you are good to go. If you have the mini-max and it’s still suction cupped to the windshield do yourself a favor and spend the money for this part. You will be disappointed. Kudos to SPE for the fast delivery.
Ross C.
Awesome product. Works and fit perfectly!!!
James G.
Nice and clean install!
Ronald P.
This mount is much better then the windshield mount that comes with the mini maxx
Michael F.
For the price, this is the mount you want. Install on either side of the dash and stays solid, even on rough roads. Great product! Thank you!
Brandon L.
Easy step by step installation, I couldn’t be happier with this product
Chad B.
Easy install, only takes about 5 minutes to switch the (not so great suction cup mount) out with this much more reliable hard mount!
Connor M.
I love it, easy install and works great. No more suction cup falling off the window, it’s in a more convenient spot too.
Jeremy p.
It's great just it's a little loose but a little 3m tap fixed that
Devin D.
I got sick of my H&S falling of my windshield. And this mount is great! Install is very easy!
Mike S.
Way nicer then the windshield mount that falls off in the hot sun, really easy to install and very clean look after!
Lee D.
Very easy to install. Took about 10 mins to pop off the side panel, drill hole through duct and run wire up to the head unit. Instructions are right on point!
Ernie C.
The trucks getting other work done on it so I don’t have it right now , but I will review the company one word GREAT! That’s all answered all my questions sent the product I ordered immediately!
Jonny C.
I love how easy it was to install and how clean it looks as opposed to the ugly suction cup holder! The customer service was very helpful and informative. I will buy more from them! Thanks y’all!
Timothy N.
This thing is better than the windshield mount makes for a more cleaner look.
Christopher S.
Love it! Hated it in the window now it's out of sight for the most part I never use the vents for air so it works out
matthew r.
Excellent fit, clear instructions and far better than a gauge pod!
Travis F.
The install took about 25 minutes and finally got the factory minimaxx mount out!! Great fit and fast shipping!
Jordan A.
I’m really enjoyed the product. Install was a breeze. Was a little loose and could turn pretty easy but fixed her up and now she tight. No more dumb windshield mount that keeps falling!
Zane F.
Straight forward, clean install and really helps clean up the inside. Would strongly recommend if your running the Minni Maxx.
David D.
Arrived right on time. Instructions were spot on. Everything fit perfectly and looks great.
Michael J.
Great customer service and detailed instructions.
Pete R.
Great idea and location, but could have had a better execution. Screen has a lot more glare in this position and is hard to see with the screen not tilted toward the driver. Also, the SPE bracket is loose inside the vent and causes the screen to shift slightly off from straight when the truck hits larger bumps. A revised version with a slight angular shift toward the driver and a thicker bracket so it held tight inside the vent and the product would be perfect. That being said, I do still like it better than my dash mount that was held on with double sided tape.
CORY W.
AS ALWAYS, ANOTHER AMAZING PRODUCT FROM DAN AND AMY. FITMENT WAS PERFECT AND VERY WELL BUILT
Adam L.
Works and looks great!
Jeffery M.
My third, and favorite mount.
Cody G.
Easy install. Very clean setup!
Carl C.
This product gets the mini max off windshield and in a perfect location. It was easy to install and I highly recommend it
CHRIS D.
Great fit and easy install!!! Great product and value
Madison M.
Install was very easy, I ended up not having to trim anything. Best way to mount the mini maxx! Will be buying another for my other truck
Wes W.
Very simple install. Fits perfect and gets an annoying mount out of the windshield. Great job SPE!
Josh C.
Instructions were good except for how to remove the air vent. Took me awhile to figure it out. Had to watch a you tube video to figure it out.
Jeremy B.
Love location, easy install!!
Brent D.
Moved to center vent. Piece is nice and in a better viewing location
Cierra R.
Surprised my husband with this mount looks great with the truck and was so easy to install only took about 30 minutes and very little tools.
Shawn P.
Awesome mount fits great clean and easy installation!!!!
Jason T.
Simplistic and well thought out, this is the best maxx mount that I have come across.
Looks way cleaner than any of the suction mounts, and is a precise fit into the back of the vent housing.
